Woodworking company "Enisey" - an enterprise of deep wood processing of a full production cycle: from timber harvesting to the production of finished products and integrated waste management lumbering
HISTORY ENTERPRISES
base enterprises
2004
2006
2017
supply of material to Japan
start of pellet production
the company is included in the list of priority investment projects in the field of forest development
The logging base of YC "Enisey" is located in the Krasnoyarsk Territory in 5 districts, North-Yenisei, Motyginsky, Abansky, Berezovsky Birilyusky with an annual allowable withdrawal of forest resources (annual estimated cutting area) of more than 500 thousand cubic meters
This allows the company to harvest large volumes of wood for production, while not depending on third-party suppliers and the situation in the primary market. Another advantage is that our company is able to process several types of wood products such as Pine, Larch, Siberian Pine, Fir, Spruce.
At the "Enisey" DoK forestry bases, modern forestry equipment is used for harvesting wood that meets high international standards that cause the least possible damage to the environment, which also positively affects the cost of production. The company at the logging site annually carries out a wide range of measures for the protection, protection and reproduction of forests.
In terms of forest reproduction, DoK LLC "Enisey" works to create forest crops and also contributes to the natural regeneration of forests, aimed at creating favorable conditions for successful forest regeneration.
Logistic Delivery Network primary raw materials
In the summer, raw materials are delivered from the logging base to the woodworking enterprise by barges along the Angara and Yenisei rivers. At the logging base, the harvested raw materials are built in rafts on the water, then they are loaded onto a barge for shipment to the enterprise. The raw materials arrived at the pier by the barge are loaded into MAZ's own vehicles and delivered to the enterprise, from where the logs are immediately loaded onto the sorting line.
Sorting logs
The entire volume of harvested timber passes the Hekotek log sorting line. The measuring module, based on high-precision laser technology coupled with a hardware-software complex, provides exceptional measurements of accuracy. This system measures the length, diameter, bend, taper and, in accordance with these indicators, gives a rating of the log. After passing through the measuring module, the logs, in accordance with the developed program, are laid out in "pockets" and then transported in the warehouse of logs.
Sawmill shop
Logs are fed to the sawmill. Various types of cutting, the correct geometry and high cutting speed - these are the main advantages of this workshop. Having passed the longitudinal cutting machine, the boards are laid out in pockets and the software and hardware complex from the sawn boards forms packages.
Drying complex
All edged lumber from the warehouse, placed in the TekmaWood drying complex. The total volume of drying chambers is 4500 m3. Fully automated material drying process allows to dry boards to technological humidity 10% -12%.
Woodworking shop
After processing in the drying chambers, edged sawn timber falls into the woodworking workshop, in which the final cutting and processing into final products takes place. The board goes through several stages of processing, such as: removal of defects, subsequent splicing and gouging on Weining equipment. These operations are performed on two shops of the enterprise: DOTS 1 and DOTS 2.
In the same workshops glued beams are produced. For this operation, a press was purchased and successfully operates in conjunction with the board preparation line. Passing along this line, the board is covered with a layer of glue (photo above), folded in a pile and sent to the press, where the future beam is formed under the required pressure and temperature.
Shipment production
In DOK "Enisey" LLC, all conditions for shipment are created and sending products to anywhere in the world. For motor vehicles, 2 shipping platforms have been designed that allow packages to be loaded into containers. The plant has a large fleet of forklifts for loading any product into any machine. Experienced dispatchers provide speed and order shipment. A dead end for railway transport makes it possible to ship and receive goods directly on the territory of DOK "Enisey" LLC. Shipment and unloading of products is possible both in covered wagons and in open wagons.
Production workshop granules
A full cycle of wood processing completes the workshop for the production of wood pellets (pellets). All chips and sawdust produced by our plant are completely processed into a product.
Wood pellets are a cylindrical extruded product from dried sawdust.
The diameter of the pellets is 8 mm. Length is from 10 to 40 mm. Pellet density is 1.12 g / cm3 The calorific value is 4.6–5.2 MW / ton.
Pellets are an environmentally friendly product. In the production of pellets no auxiliary adhesive additives are added; pellets are made from clean sawdust. To obtain a cylindrical shape the sawdust is dried and pressed in specialized machines.
MARKET OUTLETS OF PRODUCTS
Japan, Germany, Denmark, Serbia, Turkey, the CIS countries, the Russian market.
The key market for our products is Japan. The entire product line of "DoK "Enisey", LLC is sold to various cities of Japan.
OUR VALUES:
"THE EMPLOYEES PROFESSIONALISM IS ALSO ONE OF THE SUGGESTED SUCCESS OF OUR ENTERPRISE"
— Yury Gaidutskiy, General director "DoK "Enisey", LLC